Sie sind nicht angemeldet.


Suchergebnisse 1-20 von insgesamt 90.

Gestern, 05:57

Forenbeitrag von: »Donnieclark«

Error Uploading Plant 3D Project

Hello, I also posted this in the Plant 3D forum because I'm not sure where the error lies... We are getting the following error when "Sharing Project" from Plant 3D to our BIM 360 Team hub... "ApiError: No Versions specified" Screenshot attached. Any ideas? Please help. Thanks! I didn't find the right solution from the Internet. References…ct/td-p/7167646 best product teaser

Gestern, 05:55

Forenbeitrag von: »Donnieclark«

Project no more starting after import kmz file

Hi, My Project (70MB) starts no more after importing a kmz file. It loads hours until SH3D craches without error message. How do I fix it ? Please help. Thanks! I didn't find the right solution from the Internet. References…ead_thread,7629 email marketing campaign example

Gestern, 05:54

Forenbeitrag von: »Donnieclark«

Printer Hardware Error: MaxTemp triggered

I have tried uninstalling MatterControl and re-installing, turning the printer off and back on, unplugging the printer for a couple of minutes and plugging it back in. I tried connecting it to another computer and I also tried using cura. Nothing is working. This is happening when I tell Matter Control to connect to the printer. If I just click ok (the only option) on the error, I can use MatterControl, but if I tell it to heat up it won't. Any ideas? Please help. Thanks! I didn't find the right...

Gestern, 05:53

Forenbeitrag von: »Donnieclark«

Bed Can't Get Above 90Deg Before Error

Has anyone printed any ABS with the R2?Two issues: #1 it took 20 mins just to hit 90 degs with the door shut, that's just unacceptable. #2 when it hit 90, it errored out with "Unhandled communication error. The was an unhandled error while talking to the printer. Due to that OctoPrint disconnected. Error: Heating failed, system stopped! Heater_ID: bed". It happens consistently... Please help. Thanks! I didn't find the right solution from the Internet. References

Montag, 16. Oktober 2017, 10:21

Forenbeitrag von: »Donnieclark«

playback error on embedded videos in PPT 2007 and 2010 for WMV files

I need to know if it is possible to insert a video in to PPT, save the file and be able to play it on PPT 2007, 2010. I have tried several formats, WMV being the most backward compatible. Unfortunately I get a playback error on some of the videos part way through. I have re-output the video with several different compression methods but I still get the playback error on some machines. Videos play fine out side of PPT. I'm looking for a solution that will let me share a single file with video emb...

Montag, 16. Oktober 2017, 10:20

Forenbeitrag von: »Donnieclark«

I received a .ppt error Powerpoint was unable to display some of...

I received a .ppt error "Powerpoint was unable to display some of the text, image or objects on slides in the file because they have become corrupted". Affected slides (title page in this case) have been replaced by blank slides and they are not possible to recover. I already tried to save the file as the same and different name, all my .ppt files have this problem. How can I fix this error? Please help. Thanks! I didn't find the right solution from the Internet. References https://social.techne...

Montag, 16. Oktober 2017, 10:20

Forenbeitrag von: »Donnieclark«

Only 900hz out of 2.2Ghz on a Satellite Pro L450 laptop

Hi all, Was servicing a Toshiba Satellite Pro laptop, model# L450 and noticed that the cpu only stays at 900hz out of 2.2Ghz no matter what. It is running a fresh install of Windows 7 Professional, energy saving setting is at high performance, the cpu fan is clean and applied a fresh drop of silver thermal paste. Installed the latest BIOS version, which is v1.50. What could cause the cpu to stay at 900hz?? Please help. Thanks! I didn't find the right solution from the Internet. References https:...

Montag, 16. Oktober 2017, 10:18

Forenbeitrag von: »Donnieclark«

CPU choice help

Hi, Brought a lower budget gaming desktop a while back and im looking to upgrade the GPU and CPU... The GPU is a nvidia gtx 1060 and I'll upgrade to 1080... However I'm a bit confused about the CPU. The system is using H110M-S2H motherboard but has a pentium g4560 I heard that means the bios was updated? Anyhow based on this would a core i7 7700k or an i5 7600k work out of the box? Or would I need to update the bios? And if not what CPUs would u recommend? Please help. Thanks! I didn't find the ...

Freitag, 13. Oktober 2017, 14:39

Forenbeitrag von: »Donnieclark«

Enable ImageMagik on my account.

Hi, I just created a free account and on my "Account Settings" page, in the "PHP Settings" section, it says that ImageMagik is "Off". How can I enable it and how can I test if its' working? Note: I'm using PHP 7 Any idea? Please help. Thanks! I didn't find the right solution from the Internet. References…k-on-my-account Brand Reveal Animation

Freitag, 13. Oktober 2017, 14:38

Forenbeitrag von: »Donnieclark«

Error with Moodle

I can't install Moodle. When I do the installation I get an error: Fatal error: $CFG->dataroot is not configured properly, directory does not exist or is not accessible! Exiting. What do I have to do? Please help. Thanks! I didn't find the right solution from the Internet. References…ror-with-moodle explainer video maker

Freitag, 13. Oktober 2017, 14:38

Forenbeitrag von: »Donnieclark«

Recursive use of Virtual Display message

Hello all, I am using Watchout 6 on a project that has 4 Projectors. 2 for a curved wall in back and 2 for the floor and a platform that tracks up and downstage. The project is set-up to use an .OBJ for the curved wall as well as the floor and tracking platform. Each of these is then textured with a virtual display. With almost every cue we take that includes the curved back wall an error is thrown "Recursive use of virtual displays may yield unexpected results: Projector SL" What is the cause o...

Freitag, 13. Oktober 2017, 14:37

Forenbeitrag von: »Donnieclark«

Project Video On Floor - Rotate Video Screen

Hi I am looking at rigging projectors facing down, projecting on the floor. The video screen tool does not rotate 3D, so how can I achieve this? Any idea? Please help. Thanks! I didn't find the right solution from the Internet. References…e-video-screen/ whiteboard animation examples

Mittwoch, 11. Oktober 2017, 10:15

Forenbeitrag von: »Donnieclark«

Problem with red colors in Epson PowerLite Home Cinema 720

Hi everyone, I'm having a problem with my projector, It's showing very weird the red colors, it's very hard to explain so I will post some pictures where the problem is very clear. Any idea? Please help. Thanks! I didn't find the right solution from the Internet. References Brand Launch Animation

Mittwoch, 11. Oktober 2017, 10:14

Forenbeitrag von: »Donnieclark«

problems with lens of vivitek projector

I have a Vivitek projector. 2 months ago,more o less, appear many white points on the screen, like many little stars. Somebody check the projector and said me that the problems is one of the three lens inside the project. He found one lens scracht ,maybe for humidity or heat, I live in south of california and the weathear is really hot. Is that true,about lens? if is truht, haw a can find the correct lens? Please help. Thanks! I didn't find the right solution from the Internet. References http:/...

Mittwoch, 11. Oktober 2017, 10:13

Forenbeitrag von: »Donnieclark«

Painting problem

I'm using Max 2013 and Mudbox 2013. I've tried to export from max via .fbx and .obj with different setting but every time the result is the same - jagged brush strokes.. Please explain why is this happening? Please help. Thanks! I didn't find the right solution from the Internet. References…lp/td-p/4272033 Product Intro Examples

Mittwoch, 11. Oktober 2017, 10:12

Forenbeitrag von: »Donnieclark«

Landscape painting problem

Hi, I am very Unreal Engine and maybe my problem is something that has an easy solve, but I cannot figure it out. So please help me with this. I am trying to paint a pathway onto my landscape using blended layers and if I make the brush tool size smaller (like 150), in order to paint the pathway, I cannot paint or paint just in a straight line. Moreover the brush seems to be more like an square that a circle. Is there any solution to this? Please help. Thanks! I didn't find the right solution fr...

Montag, 9. Oktober 2017, 12:55

Forenbeitrag von: »Donnieclark«

Video projecting problem

I'm facing a problem with my Video SL. I have over 10 LCD & a Giant projector installed in my new club. When I connect the HD video cable, it shows up on all screen but only for about 20 seconds & then display disappears from the LCD's but remains on the projector. All the LCD's go blank/black. Tried to play from a windows laptop and it's working fine. (All the LCD's & projector) I'm using a MacBook Pro 15, and also my Mac kinda slows down when i'm playing videos on this projector, it was not li...

Montag, 9. Oktober 2017, 12:54

Forenbeitrag von: »Donnieclark«

project to back faces problem

(Unity 3.5.5) Then using projector, it projects the mask to back side of the object, wich is not visible from the point of projector. This applyes both to custom made projectors and standard blob shadow projector, wich comes with Unity. It's sad, because baked and may be manually edited projective shadow through the semitransparent or colored glass looks great, and this effect most probably is not achivable by real time shadows even in Unity Pro. Is there some way to solve backface projection pr...

Montag, 9. Oktober 2017, 12:52

Forenbeitrag von: »Donnieclark«

Laptop projects "pink" images...

Or rather the projector attached to it via the vga out projects images with a strong pink/magenta hue. An external monitor attached similarly is the same. The laptop's built in monitor is fine Everything was fine until today, I'm setting up the projector overhead in a new photo studio, I acquired a new long vga cable to suit the run required but the images have this horrible cast. I've fiddled about with display settings, even done a system restore to a time when everything was OK but still no j...

Montag, 9. Oktober 2017, 12:50

Forenbeitrag von: »Donnieclark«

Problem with the projector screen display when hook up laptop to projector using HDMI

There's no problem with the way the projector screen display my presentation when I hook up my laptop to projector using VGA. The presentation got to fill up the entire projector screen. No space on both side and no space on the top and the bottom of the projector screen between my presentation and the edge of the screen. But when I hook up my laptop to the projector using HDMI or even with HDMI/VGA converter, then my presentation does not fill up the entire projector screen. I have tried to cha...